|
Radio frequency power transmission is the transmission of the output power of a transmitter to an antenna. When the antenna is not situated close to the transmitter, special transmission lines are required. The most common type of transmission line for this purpose is large-diameter coaxial cable. At high-power transmitters, cage lines are used. Cage lines are a kind of overhead line similar in construction to coaxial cables. The interior conductor is held by insulators mounted on a circular device in the middle. On the circular device, there are wires for the other pole of the line. Cage lines are used at high-power transmitters in Europe, like longwave transmitter Topolna, longwave-transmitter Solec Kujawski and some other high-power transmitters for long-, medium- and shortwave. For UHF and VHF, Goubau lines are sometimes used. They consist of an insulated single wire mounted on insulators. On a Goubau line, the wave travels as longitudinal currents surrounded by transverse EM fields. For microwaves, waveguides are used. Masahiro Hanazawa of Toyota Central R&D Labs and Takashi Ohira of Toyohashi University of Technology developed a way to power vehicles using radio frequency power transmission with infrastructure put in the roads.〔(Prototype EV powered by radio frequency transmission demonstrated ), Gizmag, 15 October 2014, Stu Robarts〕 ==References== 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「radio frequency power transmission」の詳細全文を読む スポンサード リンク
|